Input shaft seal for a 656

[jimkemp 525]

I cant seem to find the info on a part # for a input shaft seal on a 656 wheel horse trans , does anyone have the # , its a 3/4" shaft and the seal is 1" od

[gwest_ca-(File Mod) 10,523]

Your operator manual and illustrated parts list
http://www.wheelhorseforum.com/files/file/942-tractor-1966-606-656-da-om-ipl-wiring-snpdf/

Wrong
This is the axle seal and not the input seal that was requested. Correction is below in another post
1232 is the original axle seal number. 

When you first enter the "Transmissions and Transaxles" section here you will see the first 2 posts are pinned. Open the one for bearings and seals to find alternate replacements for the 1232.

If you have trouble let us know.

Garry

Edited November 10, 2015 by gwest_ca
Big mistake

[stevasaurus 22,240]

That is not the correct seal for the input shaft.  It is WH# 1303 which became TORO #100441 and that crosses to SKF #7410.  This is for a 3/4" shaft.

Garry gave you the number for the seals in your axles (which are 1" dia).  BTW if you want to change out your axle seals...that WH#1232 crosses to SKF #9815. 

[gwest_ca-(File Mod) 10,523]

Glad you are awake stevasaurus. Thanks for correcting me.

Garry

[stevasaurus 22,240]

Garry, that is the 1st time for me...usually you are backing me up.    Thank You.
Actually, I was thinking you read input and it looked like axle.