Fordiesel69 271 #1 Posted November 9, 2015 Got a 14HP briggs twin (like the ones used on our workhorse) but it is 14HP. I need to know the valve clearnace. Share this post Link to post Share on other sites
shallowwatersailor 3,214 #2 Posted November 9, 2015 I'd suggest looking it up on the Briggs and Stratton website. Share this post Link to post Share on other sites
Fordiesel69 271 #3 Posted November 9, 2015 That was quite helpful............. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,510 #4 Posted November 9, 2015 What are the engine numbers?Garry Share this post Link to post Share on other sites
Howie 899 #5 Posted November 10, 2015 Intake .004 to .006 with springs, .006 to .008 without, exhaust .007 to .009 with springs .009 to .011 without. All of these twins use the clearances..Hope this helps. David Share this post Link to post Share on other sites
Fordiesel69 271 #6 Posted November 10, 2015 Perfect. Now I just need to take a bench grinder with me. I had the valve seats ground on the valves, so no doubt they will be too tight. Share this post Link to post Share on other sites
