jasonw 17 #1 Posted November 1, 2015 I found my third wheelhorse on craigslist a few weeks ago. This one is a c-161 manual trans with a custom built trailer (previous owner was an aircraft mechanic) and built a really nice trailer with an aluminum bottom. The tractor has been repainted by the previous owner and stored inside a shed for many years. I just wish these were not so expensive in Texas. 17 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,534 #2 Posted November 1, 2015 Very nice for sure. Running a rubber mounted 16hp kohler with gear drive. Can't beat that set up. 2 Share this post Link to post Share on other sites
Sparky-(Admin) 23,162 #3 Posted November 1, 2015 I don't know what you paid, but that's a sharp looking machine! It wouldn't be all that cheap (in that shape) around here either.Mike........ 3 Share this post Link to post Share on other sites
JackC 617 #4 Posted November 1, 2015 I do not see a spec of rust on that.Those wheels are about as clean as they come.Don't know what you paid but based on the condition it was worth it.That can go right back on the showroom floor along with that neat trailer. 1 Share this post Link to post Share on other sites
Gunny 250 #5 Posted November 1, 2015 Nice find. They are available down our way, but rather pricey for one that nice. Great find! Share this post Link to post Share on other sites
oliver2-44 10,734 #6 Posted November 2, 2015 Very Nice! Share this post Link to post Share on other sites
KC9KAS 4,744 #7 Posted November 2, 2015 Very nice find, and !Thanks for the photos. Share this post Link to post Share on other sites
jasonw 17 #8 Posted November 2, 2015 I can't find pics of the c-175 that I restored a few years ago...but here is a youtube video of it.https://youtu.be/2tMwmcoGhusThe 10hp diesel has enough torque to go through tall grass and pull my 16' trailer without a problem...just hold on.I am working on my c161 auto that until now was 100% original from 1978. The deck has been patched, but it is beefed up really nice now. The c161 auto has the fiberglass hood and rear fender, but they are in nice shape. I did have to trim the left side of the hood to clear the air filter on the predator engine that is going in it. When it is done, it will be a working machine, not a show unit..it will get a descent paint job and some new ag style tractor tires. Share this post Link to post Share on other sites
MalMac 1,332 #9 Posted November 2, 2015 They just don't get any better then a C-1x1 8-speed. The backbone of Wheel Horse. Nice find. Share this post Link to post Share on other sites
Wheel-N-It 2,976 #10 Posted November 2, 2015 Very nice for sure. Running a rubber mounted 16hp kohler with gear drive. Can't beat that set up. Agreed Share this post Link to post Share on other sites
SylvanLakeWH 28,442 #11 Posted November 2, 2015 Welcome!Nice tractor!How about some more pics of the custom trailer?Does it tilt? 1 Share this post Link to post Share on other sites
jasonw 17 #12 Posted November 2, 2015 yes..it has a dump lever that has a rope attached and can be dumped from the seat...all custom built and done really nice. The previous owner said he could build anything from a picture. I will pull it out of the shed in the next few days (just had almost a foot of rain this weekend) and get some pics of it. Share this post Link to post Share on other sites
Retired Wrencher 5,790 #13 Posted November 2, 2015 All I can say is WOW. That is nice you did very good. Enjoy the ride. Gary B.. Share this post Link to post Share on other sites
Pullstart 66,815 #14 Posted November 2, 2015 That sure is a shiny machine! Congrats on the score and welcome to RedSquare! Share this post Link to post Share on other sites
953 nut 60,070 #15 Posted November 2, 2015 Wonderful find, glad it went to a good home. Share this post Link to post Share on other sites
TDF5G 2,073 #16 Posted November 3, 2015 Good looking horse. Have fun with it! Share this post Link to post Share on other sites
