new2horses 287 #1 Posted October 24, 2015 I bought this several years ago, and just shoved it back in the corner, saying it would be my next project. Well, there have been several since then, but this is the year to get-er-done! It was purchased from the original owners son who had attempted to make it electric start. Fortunately he didn't cut anything and only made a few holes. I have since removed all the additions and tried in vain to make it run with the tilliston carb. So I installed a carter and borrowed a part from one of those green ones, and now have a good runner with air cleaner. Seat if funky like most and the like most the hood needs a little work a the bottom front. I did remove all the steering linkages, and replaced the fan gear which had a tooth missing, it had also been broken at the roll pin. Removed all the parts cleaned, everything applied locktite and new roll pins, steering now is as new. I do not intend to paint it, just a little more cleaning and maybe a seat along with repairs to the hood.Almost forgot, as it has the two piece tank, that had been welded to make the leaks go away, the tank looked nothing short of awful, so I replaced the it too.Enjoy. David 4 Share this post Link to post Share on other sites
new2horses 287 #2 Posted October 24, 2015 MODS, would one of be so kind as to rotate this picture please? I just can't seem to get it right.Thanks, David Share this post Link to post Share on other sites
Jake Kuhn 1,579 #3 Posted October 25, 2015 Looks real nice Dave! Share this post Link to post Share on other sites
rmaynard 16,297 #4 Posted October 25, 2015 Looks like a nice one. Just so I don't have to turn my monitor on it's side each time I look at it, I will rotate your image here. However, if you click on your image, it rotates correctly. Go figure. 2 Share this post Link to post Share on other sites
neil 2,410 #5 Posted October 25, 2015 Whatta little beauty, have fun with it Share this post Link to post Share on other sites
JC 1965 1,532 #6 Posted October 25, 2015 Looks like it's in great condition. Thanks for sharing. Share this post Link to post Share on other sites
AMC RULES 37,196 #7 Posted October 25, 2015 Still retains it's nice original work clothes. hope you don't repaint it, except for maybe, just the front rims. 2 Share this post Link to post Share on other sites
Shynon 7,482 #8 Posted October 25, 2015 Still retains it's nice original work clothes. hope you don't repaint it, except for maybe, just the front rims. Oil her up she will look great. 1 Share this post Link to post Share on other sites
new2horses 287 #9 Posted October 25, 2015 Thanks to all for the kind remarks and especially to Bob Maynard for rotating the picture for me. For those few that might not know this is a 633. I really wanted it to go with the tilloston carb, but it just would not happen. I will be watching for a carb and if I find one it will go on.Except to be used, I don't think this little baby has ever spent any time out side, it came out of a basement in SW Ohio. 1 Share this post Link to post Share on other sites
buckrancher 2,694 #10 Posted October 25, 2015 dave whats the problem with the tilloston?I may be able to help by the way nice rideBrian 1 Share this post Link to post Share on other sites
