mtpocketsc161 0 #1 Posted November 25, 2008 Hello All I am at a loss trying to find 3 spindles and 1 spindle housing for a 48" side discharge deck, model 95-48MS01. I have this deck on my 79 C-161 and I will not part with it. If anyone could point me in the right direction it would be greatly appreciated. Thank You In Advance! Bob :hide: Share this post Link to post Share on other sites
JimD 3,345 #2 Posted November 25, 2008 hi pocket, check out ebay. and whike you're there look in the ebay store for tnt parts, joe's outdoor power. good hunting, jim. Share this post Link to post Share on other sites
Buzz 502 #3 Posted November 25, 2008 Go to Toro's MPV: https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro Enter model 95-48MS01. That will give you a parts breakdown of your deck. The spindle assy is NLA but write down the individual parts you need. You can go to Parts Tree: http://www.partstree.com/parts/?lc=toro_consumer&mh=8 And see what's available. It shows most of them are. A little pricey but available. Share this post Link to post Share on other sites
Teddy da Bear 11 #4 Posted November 25, 2008 :hide: Bob! Many times you can find old decks at dealers or auctions. The deck might be rotted, but the spindles might be in good condition. Good luck! Share this post Link to post Share on other sites
mtpocketsc161 0 #5 Posted November 25, 2008 Thanks everyone. BTW nice forum, and helpful people. Very much appreciated! Bob Share this post Link to post Share on other sites
Duff 206 #6 Posted November 25, 2008 Hi, Bob, Just wanted to say ! Good hunting - the spindles will be out there somewhere, I'm sure! Duff :hide: Share this post Link to post Share on other sites
daemon2525 5 #7 Posted November 25, 2008 There are a couple on E-bay, but you have to spell spindle wrong. SPINDEL http://cgi.ebay.com/WHEEL-HORSE-48-DECK-SP...A1%7C240%3A1318 Share this post Link to post Share on other sites
mtpocketsc161 0 #8 Posted November 28, 2008 I saw those. I asked him for a part no. and/or a length and diameter and he has no idea. I'm a little confused with that one. They look real close. The only thing that bothers me is that the hex part looks smaller than what I have. Pictures can be misleading though. Maybe new ones for 50 bucks are the way to go. That way I'm sure. Thanks for the help. Bob Share this post Link to post Share on other sites
