zekepiks 8 #1 Posted September 1, 2015 I would like to install some led lights on my C 161 b&s twin, The e-bay site I was going to purchase them from says they are 18 watt, I don't know how much power, in watts or amps the b&s 16 hp twins stator supplies. Could someone give me some guidence. thanks in advance Skip Share this post Link to post Share on other sites
JPWH 6,021 #2 Posted September 2, 2015 The led lamps will be 1.5 amps each. I don't know what your stator would be. If you have incadecent lamps now you will be OK. Share this post Link to post Share on other sites
zekepiks 8 #3 Posted September 2, 2015 thanks Hanko1 for your quick reply, I'll order them then, Skip Share this post Link to post Share on other sites
WNYPCRepair 1,893 #4 Posted September 2, 2015 LEDs use way less power than incandescent, you should be fine. We recently had a power outage here, but still had some voltage still. None of the incandescent lights in my house would work, but the LED bulbs lit right up. I think someone's generator was backfeeding through the power lines, but I'm not sure. Share this post Link to post Share on other sites
Aldon 4,826 #5 Posted September 2, 2015 Tell us how they work out. I also have a C161 Briggs twin. They don't get a lot of love but if you have one it's likely one of your favored tractors. 1 Share this post Link to post Share on other sites
