bobdesros33 0 #1 Posted August 27, 2015 Hello, I'm new to the forum. I have a 79 c101 I purchased a few years ago. It runs great. I was interested in Wheel Horse's as they were what my grandfather had when I was a kid. I am looking for a snowblower for the tractor and am wondering if the snowblower in the following link will fit...I know the ad says for d series but I am unsure as to any cross over for implements across the different series of tractors. https://maine.craigslist.org/grd/5146342786.htmlThanks Bob Share this post Link to post Share on other sites
Ed Kennell 40,880 #2 Posted August 27, 2015 (edited) Sorry Bob, that blower will not fit on your C-101. You need a blower that fits any C series, 300 series, 400series, or 500 series.Some of these blowers attach to the frame and some to the front attach-a-matic. Either type will mount on your C-101 as it should have the front attach-a-matic.Keep looking, there are plenty of these blowers out there. I have one on the York,Pa CL now. Too bad you are so far away. Here is a pic of a short chute single stage with the frame mount. You can see the long bolt that goes thru the two holes in the tractor frame.And here is a tall chute single stage with the front attach-a-matic mount. You can see the solid round bar that hooks into the front mount. Either would work fine on your C-101. The tall chute is a little more desirable. Good luck and to Edited August 27, 2015 by ekennell remover duplicate pics Share this post Link to post Share on other sites
Brian01 481 #3 Posted August 30, 2015 I have a snow blower for sale in classifieds...not sure what it fits, but I'll take $165 for it. But looks like you're too far...sure you wouldn't want to drive to Missouri Share this post Link to post Share on other sites
bobdesros33 0 #4 Posted August 31, 2015 Thanks but I am not looking for a trip to Missouri.... Share this post Link to post Share on other sites
bmsgaffer 2,052 #5 Posted August 31, 2015 Check fastenal 3pl (third party logistics). Rates are reasonable if you really want one. YOu just have the seller pallet and drop off at nearest fastenal, you go pick up at your nearest fastenal couple weeks later.I had a fairly large pallet with blower, bagger, weights and more on it shipped from Maryland for $120 or so. Just got quoted shipping a small tractor to Massachusetts for $150. Share this post Link to post Share on other sites
