daveoman1966 3,841 #1 Posted August 21, 2015 (edited) Since this is a Wheellhorse venue, I may be chastised for asking about a non-Wheelhorse pulley. However, I have spent many an hour on my pc trying to ID this thing. Me thinks it is a mower deck CENTER PULLEY but I simply cannot find an image of it anywhere. Here goes..... short description:Small pulley is 4" dia and it is a 'A' size V belt.Larger pulley is 4.25" dia but for a 'B' size V belt.Overall Height / width is 4.125"The MOUNTING FLANGE is closer to the Large pulley and the flange is 5" dia, with four (4) threaded mounting holes in a SQUARE pattern of 2.875" on center.The mounting flange would be bolted to a fixed plate of some sort...vertical or horizontal. The pulleys are BOTH WELDED to the center shaft and DO NOT move independently. I just can't fig out what this is, but it is NEW. To minimize overloading RedSq with non-Wheelhorse stuff, anyone can post a reply to me at this email address (just clik it):daveoman@windstream.net Edited August 21, 2015 by daveoman1966 Share this post Link to post Share on other sites
