Brian01 481 #1 Posted June 26, 2015 Hey guys, my battery will not stay charged. There are two wires, looking out of the flywheel shroud, guessing those are the alt. Wires...not sure if its even any good...where would I hook those two wires? Share this post Link to post Share on other sites
C-101plowerpower 1,605 #2 Posted June 26, 2015 (edited) they should hook up to this this thingythe regulator. yours might look different Edited June 26, 2015 by C-101plowerpower Share this post Link to post Share on other sites
Brian01 481 #3 Posted June 27, 2015 Yep same thingy lol....can you get a new regulator like that at the auto parts store? Or is it special order or discontinued? Share this post Link to post Share on other sites
Brian01 481 #4 Posted June 27, 2015 How would I know whether or not the regulator is good? Also how could I tell if the alt. Is working or if it's just that the battery is junk? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,524 #5 Posted June 27, 2015 The best test instructions are in the Kohler service manual. I suspect you have a 15 amp system but the engine spec number would confirm that if you post it. Some did have a 10 amp system.http://www.wheelhorseforum.com/files/file/4104-engine-kohler-k-series-sm-tp-2379pdf/Garry Share this post Link to post Share on other sites
Brian01 481 #6 Posted July 1, 2015 Hey Mod, if possible you can delete this thread..I made another because my phone messed up, sorry. Share this post Link to post Share on other sites
