Onan Fuse Block and Terminals Supplier

[doc724 925]

I have a 416H that is plagued by the typical fuse block and Molex connector problems.  I have searched the forums for suppliers (other than Toro) for the the fuse block and the terminals with no luck.  Toro will only sell the fuse block anyway.   Bob Maynard has kits for the 9 pin Molex connector I am told.

Anyway,  I have surfed around and I believe that the fuse blocks and terminals are made by Delphi.  They are a Delphi Pack-Con 3 product.  They are available at Waytek Inc (on line) for reasonable price (I have not yet checked shipping costs).

Delphi P/N's are as follows
Fuse block:  12004943  $1.45 ea Min qty=4
Terminal 12GA: 12020400 (unplated brass) $.29 ea  Min qty=50
Terminal 14-16GA:  12020321 (unplated brass) $.14 each  min qty=50

Minimum qty make this a bit pricy and it is the terminals that fail, not the fuse block.  Also, I believe there are tin plated terminals available and these are the ones to get.  The tin plate will make a gas (not to be confused with gasoline) tight seal with the fuse so oxidation will be minimized.

Anyone else found a source for these parts?

 

[rmaynard 15,937]

Can any of these be of help? These are the terminals that go into the relay blocks.

Click on link and scroll to the bottom.

http://www.rmaynard.com/electrical_parts.html

[boovuc 1,090]

One of our members here offers some specific parts for Onan Powered Wheelhorse tractors. His website specializes in retro kitchens but if you look, you'll find fuse block repair kits for the blocks in the WH's.
http://classickitchensandmore.com/wheel-horse-tractors-parts-c-42/?zenid=kjrevi19bh591vgigu8jtcm945
 

[rick 245]

Check out Del City, that is where I got my fuse terminals and block
 

[doc724 925]

Thx Rick.  I ordered mine from Del City as well.  Everything has now arrived-just need to set aside a few hours to work on it.

[shallowwatersailor 3,214]

I have also found them on eBay last year. The 5xi series uses the same block as well

Edited June 7, 2015 by shallowwatersailor

[rick 245]

glad to be of help!