oe espo 32 #1 Posted May 17, 2015 (edited) Trying to put a 50" grader blade (0750BM03 70222) on a 520 H (73501). It has the offset lift link when I got it. however it doesn't have the service bulletin modification that prevents it from hitting the gear reduction steering has anyone done this modification? does it fix the problem? bulletin says to remove 1/4". Wonder how much a pain it will be. Edited May 17, 2015 by oe espo adding link Share this post Link to post Share on other sites
bubbacola 8 #2 Posted May 18, 2015 I put the gear reduction steering on my C175 auto twin and ran into the same problem... I bend the lift arm over and made a new lift link put pin was close to front of link as I could... It misses but just... This was on a C175 auto twin Share this post Link to post Share on other sites
oe espo 32 #3 Posted May 20, 2015 Well here is what I did, per service bulletin, let's hope it works. Share this post Link to post Share on other sites
