clip 185 #1 Posted May 12, 2015 I figured since the rest of the Work Horse got new tires the mower deck deserved some new gage wheels. I'm guessing the old ones were original from the looks. Couldn't bring myself to pay $23 each for the wheels from Toro so I hunted around and found some at the local True Value. These were Arnold 6x1.5 steel wheels with an offset hub and a diamond tread (http://www.arnoldparts.com/equipment/arnoldparts/490-320-0001). I could have picked up a ribbed tread but it had a centered hub. Beggars can't be choosers. Also got some 1/2 shoulder bolts in a 1 3/8 length, nylock nuts, and four 1/2 washers to shim in case. Got the old wheels off and measured them at 5.5" OD. The old shoulder bolts were wrecked too. These wheels had almost 3/4 inch of play at the outer edge. New wheels mounted with the new bolts, needed two washers each on the inside since the shoulder was about 5/32 longer and the thread was the same amount shorter. I ended up using the old 3/8 nuts on the new bolts with a drop of red loctite since the threads just barely protruded from the nut. Looks good, no more wobble. Total was around $19. 4 Share this post Link to post Share on other sites
Tankman 3,523 #2 Posted May 13, 2015 Looks fine, and the price is right. Thanks for the heads up! Share this post Link to post Share on other sites
