turtlehead 88 #1 Posted April 14, 2015 Ok, here's the scene. A few of us guys at work were talking about our old WH's that we work on or had at one time. The subject of more power came up for an old single cylinder (lets just say a 12hp K301). Keep in mind that none of us are pullers and were just looking for the cool factor. I thought that three inline k301's would surely take the cake for coolness. Link up all the pto's to each other, mechanically or with electric clutches. Start only the rear most engine, and when you needed more power, just engage a pto (and also ignition) and send power to next engine to start it and so on. I know there are some real ringers on here when it comes to engines and was just wondering if it was ever done, could be done, or one of my buddies should have thrown a wrench at me? 1 Share this post Link to post Share on other sites
KC9KAS 4,741 #2 Posted April 14, 2015 There was a photo of something like that on Red Square not too long ago. Maybe someone remembers who was involved. Share this post Link to post Share on other sites
HorseHead1089 99 #3 Posted April 15, 2015 look up 4 cylinder briggs on youtube its a whole build series and i think the channel is 805roadking or somthing Share this post Link to post Share on other sites
rustyoldjunk 127 #5 Posted April 15, 2015 Some of the Wheel Horse Hot Rods a buddy has built over the years. 2 Share this post Link to post Share on other sites
neil 2,398 #6 Posted April 15, 2015 Found this pic recently, thought it was really cool 3 Share this post Link to post Share on other sites