jeremi3210 742 #1 Posted April 9, 2015 Anyone here ever have any luck rebuilding a electric clutch? Are the bearings replaceable? I picked one up cheap 19 bucks, the field coil works but it's a little rusty and the bearings seem a little dry just wondering if anyone ever worked on these. Share this post Link to post Share on other sites
953 nut 59,900 #2 Posted April 11, 2015 I have never taken apart an electric PTO clutch, but did find a manual on doing the job here on Redsquare. WH61-90 #298c Replacement Parts Electric Clutches.pdf Hope this is helpful and when you do the job please post some photos and commentary, you will be the site expert on these at that point. Hope this is helpful. Share this post Link to post Share on other sites
