IvanW 8 #1 Posted April 3, 2015 Hey guys, I need to get my D180 running but it's not going to happen without a wiring harness. Does anyone have a used one I can buy? If not, is there anyone who can make one up for me? Thanks guys! Share this post Link to post Share on other sites
pfrederi 18,566 #3 Posted April 3, 2015 What have you got to work with and how nice do you want it to look are key questions. I have rewired most of my D200 but it isn't a neat harness. Save Old Iron has posted here about how to build a harness starting by stapling the existing one to a panel and using it as pattern to make a new one. The wiring isn't really that complex I replaced wires one at a time. Share this post Link to post Share on other sites
IvanW 8 #4 Posted April 4, 2015 Well, the problem is the previous owner disconnected the original wiring and started splicing here and clipping there. Lord only knows why. Share this post Link to post Share on other sites
bmsgaffer 2,052 #5 Posted April 4, 2015 Be sure to post an ad in the wanted section if you havent already. Some people tend to look there more than digging through the other sections. Be sure to include details like the year and engine type. Share this post Link to post Share on other sites
IvanW 8 #6 Posted April 4, 2015 Be sure to post an ad in the wanted section if you havent already. Some people tend to look there more than digging through the other sections. Be sure to include details like the year and engine type. I'll do that. Thanks. Share this post Link to post Share on other sites
