Put a Lid on It ! 701 Fenderpan /box

[Lane Ranger 11,681]

I cut out some  aluminum 1/16 inch diamond plate for a rear fender pan/box and rear for the pan  this weekend.  I  used a metal break  shear   to cut the  diamond plate sheets out.

 

 Used sheet metal screws to install and placed my rear tail light on the pan.   Trimmed it in U shaped door edge guard when completed!   Due  credit  for this  goes to Jon Bell !

 

 

 

I  put a black knob on the back to lift the lid!

 

 

 

 

 

Edited February 24, 2015 by Lane Ranger

[ol550 838]

Now if you can get Martin's Horse blanket you'll be ready to ride.

[TT-(Moderator) 1,169]

I  used a metal break to cut the  diamond plate sheets

 

A shear cuts, a brake bends.

 

Watch the low-sided box with the "big" fenders and no "X" braces.  

[Lane Ranger 11,681]

Yep  shear  TT.    That's what I used . 

 

 

Diamond plate on rear fender pan is all installed on the 1961 701 now! Looking better all the time!

 

 

 

 

 

[Wishin4a416 2,324]

That really looks sharp!

[Sparky-(Admin) 24,047]

Very nice mod!!

Mike....

[Pullstart 68,543]

ooooo shiny!

[stevebo-(Moderator) 8,601]

Looks like a great place to put cigars. Did you line it with cedar?

[Firpo701 407]

I'm liking that a lot! ;-)

[312Hydro 474]

That's as nice as having a stainless 520 muffler guard! No! That's BETTER than a stainless muffler guard! Really nice work,just need my sunglasses.