papasan1 4 #1 Posted February 23, 2015 r for 3 days, working perfectly. After an hour today, won't lift over one inch. The hydraulic tubh. What happened? Thankse is fully working but only catches the lift arm near the end of the travel length. What happened. Thanks Share this post Link to post Share on other sites
papasan1 4 #2 Posted February 23, 2015 Well that post got screwed up. The lift now won't raise the snowthrower over one inch. The hydraulic tube is moving full distance, just seems to start lifting near the end. Thanks Share this post Link to post Share on other sites
ericj 1,579 #3 Posted February 23, 2015 did the cotter pin come out of the lift tube and tube come off pin on blower. if the lift arm on tractor is moving full stroke, then the problem is not the tractor and basically only leave the cotter pin were the lift tube fastens to the blower. i could be miss understanding what you are describing and i've been wrong before and i'm sure i'll b wrong again, but it don't hurt to check it eric j Share this post Link to post Share on other sites
