rustyoldjunk 127 #1 Posted October 28, 2008 i have been told there is someone reproducing the plastic panels for the GT14 tractors and they are availible online but i have yet to find it , anyone know anything about this or am i just wishing in the wind again? Share this post Link to post Share on other sites
Rollerman 290 #2 Posted October 28, 2008 You may want to shoot Steve "refracman " a PM on the site. He know's as much about GT's as anybody & might be able to help you out. Share this post Link to post Share on other sites
Brrly1 1,146 #3 Posted October 28, 2008 Hello I believe Glen Pettit is repoping the dashes and forward control panel . He is out of Michigan and does occassinally put them up on ebay. He also has them available thru him. Every so often Glen will make a post here in the club. Burly Share this post Link to post Share on other sites
rustyoldjunk 127 #4 Posted October 28, 2008 thanks guys.Brrly do you know how to get ahold of hin? Share this post Link to post Share on other sites
bitten 134 #5 Posted October 28, 2008 I have heard that most of the problems with these (old ones) is that they warp. Has anyone tried to heat them in maybe an oven (150 or so)sandwiched between maybe 2 steel plates? Just a thought, P.J. Share this post Link to post Share on other sites
rustyoldjunk 127 #6 Posted October 28, 2008 i just need new ones.one tractor is missing one and the other one is warped cracked and chipped.the second tractor is missing both panels. Share this post Link to post Share on other sites
glenn27 71 #7 Posted October 28, 2008 He goes by Glenjeri on e-bay--a couple just went out last week. Here's his e-mail addey, the last tyime I communicated w/ him.... Glen Pettit Share this post Link to post Share on other sites
rustyoldjunk 127 #8 Posted October 28, 2008 thanks glenn Share this post Link to post Share on other sites
GlenPettit 1,717 #9 Posted October 30, 2008 This is Glen with the GT-14 Dash Panels and Shift Plates. Yes, I still have some: $40 and $25 (+6 shipping), or both for $60 (which includes shipping). Just finished making the steering wheel inserts for all Wheel Horses since '62, these are a match for the original plastic, but instead of the original decals they each have the colored WH logo (black & red on white) embedded in clear domed plastic ($15 + $2). Hope to have pictures this weekend and be on eBay again Sunday. Have made & am making many of the small plastic parts for the older Wheel Horses. Personal checks OK. GlenPettit@cablespeed.com Glen Pettit Share this post Link to post Share on other sites
gzx3sc 0 #10 Posted December 22, 2008 Just type in GT14 in Google and you'll find the guy. Share this post Link to post Share on other sites
WH69GT-14 0 #11 Posted December 22, 2008 I have heard that most of the problems with these (old ones) is that they warp. Has anyone tried to heat them in maybe an oven (150 or so)sandwiched between maybe 2 steel plates? Just a thought, P.J. I have one that RustBuckets brought me with a tractor that was warped really bad that I heated up between two pieces of slate floor tiles on top of my wood stove until it was flat. Then I took it out to my garage and clamped it down tight while it was cooling to make sure it stayed flat and it's perfect! Don't know about an oven, but this worked GREAT for me :banana: I can post a pic if anyone wants? Share this post Link to post Share on other sites
Sammy 89 #12 Posted July 19, 2020 Hey I was wondering if anyone had a way that I could get should of glen, I bought a 1971 that needs both the dash and console plastics and I tried the email address listed above and it isn’t active anymore. Share this post Link to post Share on other sites
R Scheer 505 #13 Posted July 20, 2020 If you go back to the main forum screen, scroll down to classified, then go to wheelhorse vendors, you will see Glen Pettit as one of the venders. Share this post Link to post Share on other sites
hcminis 1,700 #14 Posted July 20, 2020 I've send Glen two emails and not heard anything back from him. Thought he was back up and running?? Share this post Link to post Share on other sites
Perry tucker 0 #15 Posted July 26, 2023 On 10/28/2008 at 7:16 AM, Rollerman said: You may want to shoot Steve "refracman " a PM on the site. He know's as much about GT's as anybody & might be able to help you out. Need dash and shift plate for a gt14 wheel horse Share this post Link to post Share on other sites
cafoose 3,456 #16 Posted July 26, 2023 2 hours ago, Perry tucker said: Need dash and shift plate for a gt14 wheel horse 1 Share this post Link to post Share on other sites
Perry tucker 0 #17 Posted July 28, 2023 On 10/29/2008 at 8:04 PM, GlenPettit said: This is Glen with the GT-14 Dash Panels and Shift Plates. Yes, I still have some: $40 and $25 (+6 shipping), or both for $60 (which includes shipping). Just finished making the steering wheel inserts for all Wheel Horses since '62, these are a match for the original plastic, but instead of the original decals they each have the colored WH logo (black & red on white) embedded in clear domed plastic ($15 + $2). Hope to have pictures this weekend and be on eBay again Sunday. Have made & am making many of the small plastic parts for the older Wheel Horses. Personal checks OK. GlenPettit@cablespeed.com Glen Pettit Need dash and shift plate for a gt14 Share this post Link to post Share on other sites
hcminis 1,700 #18 Posted July 30, 2023 On 7/28/2023 at 9:10 AM, Perry tucker said: Need dash and shift plate for a gt14 Believe that Lowell with wheelhorsepartsandmore.com now has these available. Share this post Link to post Share on other sites
