cheesegrader 433 #1 Posted February 8, 2015 I know that Matt's pedal conversion is popular. I'm sure happy with mine. I still have the old control lever in place, but I want to get it out of the way. Will it just lift out when I remove all the collars on the shaft, or will I have to take the steering wheel off to get this out? Share this post Link to post Share on other sites
Red-Bovine 334 #2 Posted February 8, 2015 (edited) I know when I took mine off, I had a heck of a time getting the roll pins out of the collars. The roll pin holding the steering wheel on is very easy to get off. I like not having the lever there anymore. It was always in the way. I jumped around the nuetral switch and always start the tractor when the park brake is applied. That way I know the tractor is in nuetral. Red Edited February 8, 2015 by Red-Bovine 1 Share this post Link to post Share on other sites
Forest Road 594 #3 Posted February 8, 2015 (edited) I'm happy that I left mine in place. I have size 14 feet. With some boots it's difficult to go reverse w the pedal. Just my $.02 Edited February 9, 2015 by Forest Road Share this post Link to post Share on other sites
skrusins 128 #4 Posted February 9, 2015 I also have a problem for reverse, but I love the forward pedal Share this post Link to post Share on other sites
