RickF 8 #1 Posted January 26, 2015 I have a GT14 and have been looking for rear wheel weights for 15" rims without any luck. Does anyone have them? Do they even make them? Would 12" wheel weights fit? Thank you for your input. Rick Share this post Link to post Share on other sites
Hodge71 665 #2 Posted January 26, 2015 Weights from a D series or a C-195 will fit. May need to drill holes but they will be ok Share this post Link to post Share on other sites
baerpath 517 #3 Posted January 26, 2015 (edited) Yes there are special weights for the GT14's. I have a couple sets I'll see if I can get a picture or maybe someone can post one They mount to the inside of the hub Edited January 26, 2015 by baerpath Share this post Link to post Share on other sites
Lane Ranger 11,394 #4 Posted January 27, 2015 (edited) This is the weight set you are looking for your GT -14. They were made for the 15 inch 4 bolt wheels used on the Wheel Horse 953, 1054 and GT-14 wheels. They are mounted in the inside of the wheels one half at a time . I have two sets and they are on 1964 Wheel Horse 1054 tractors. You can click on this scan to expand the view : Edited January 27, 2015 by Lane Ranger 1 Share this post Link to post Share on other sites
wheel-mule 46 #5 Posted January 27, 2015 I know I have a set of split weights I'd sell but will have to look and see if they are 12 or 15".$150 1 Share this post Link to post Share on other sites
