Dhodge 528 #1 Posted December 26, 2014 I have been looking for a .020 over piston for a tecky 12 horse. What's everyone using to rebuild the 12 horse Tecumseh engine? Any help is appreciated. Share this post Link to post Share on other sites
slammer302 2,154 #2 Posted December 26, 2014 Good luck tecky over size parts are hard to find Share this post Link to post Share on other sites
rmaynard 14,915 #3 Posted December 26, 2014 I may have a .010 over with rings. Are you beyond .010 now? Share this post Link to post Share on other sites
Dhodge 528 #4 Posted December 26, 2014 (edited) Yeas I am right at 0.90"-0.10" past standard so I thought I better go to a 0.20" over size. I did find a 0.20" and a 0.30" on Ebay with rings and wrist pin so I bought them both. Does not hurt to have an extra since they are so hard to come by. Has anyone found a good aftermarket, oversize for the Tecumseh HH120? Has anybody tried anything else with any success? Edited December 26, 2014 by Dhodge Share this post Link to post Share on other sites
rmaynard 14,915 #5 Posted December 26, 2014 I think Stens has some. Share this post Link to post Share on other sites
Dhodge 528 #6 Posted December 27, 2014 I think Stens has some.I checked---they have rings, rods, cranks but no pistons Share this post Link to post Share on other sites
