1968 Wheel Horse mod. #1-2631 Lawn Ranger, parts needed
By
saxonm, in Restorations, Modifications, & Customizations
-
Similar Content
-
By davem1111
My original "inquiry" thread has been frozen but is still viewable, so please refer to it for pictures and descriptions:
I've dropped in $800 as a "starting price" for the entire lot. At first I thought it should be a higher number, but as I mentioned I am not looking to get top dollar, I am looking to downsize. My preference is to sell the entire lot, but depending on the interest level I may be willing to sell some things separately, and possibly ship small things. A lot of this is in the "Free Stuff" category, but that mostly applies to someone who wants to buy the tractors and wants all the free stuff along with them.
If you have questions about anything in the pictures, ask here or send a PM. I can take more pictures if needed.
Ideally I'd like this all gone before winter sets in.
-
By DevonianHorse
Hi all, on a 1977 Wheelhorse C-100 (Belgium made), I have a question
My Wheelhorse hood opens really far- it does eventually stop but I don't think it is meant to go this far and that there's a piece missing.
In this photo, there's a hole you can see (near the middle of the pic, 1/3 down) and the same on the other side of the hood mounting part of the frame- I assume some sort of bar is meant to go between them that the hood latches at the base will catch on and this stops the hood dropping further when opened? If this makes no sense sorry- I have simply always assumed that the hood is meant to open at a right angle from the front, but having seen videos, I can see most stop before that.
Does anyone know the part I need, or would two bolts, one on each side, do the job? Mine has never had one, so I am unsure.
Thanks!!
-
By Brockport Bill
Wheel Horse Classic Toro Hood - Excellent original factory paint condition - Cash pick up near Poughkeepsie, NY. No Shipping. As is - no returns. Buyer should confirm match to their tractor model. Please send p.m. message.
-
By PAguy
This weekend I had an issue where my pivot pins retaining ring came off without my noticing and placed pressure on the front bar that's welded to the frame and bolts the hood and front hitch down.
I can easily replace the pivot pin but am wondering about how difficult it is to weld this bar back on. The farmer down the road from me is able to weld it but was hoping maybe someone could share how they accomplished this given the tight space. This afternoon once its warmed up I intend to clean up the area well and take the front axel off to prep for the welding so that won't be an issue.
Photo attached
-