canam1991 2 #1 Posted October 20, 2008 :omg: First is there a restrictor plate on a D 250? Is it the 1/2" plate under the carb? will it hurt to take it off? :USA: Share this post Link to post Share on other sites
Docwheelhorse 2,570 #2 Posted October 20, 2008 I don't know if there is a restrictor plate, if there is and you remove it, it will definietly be a violation in NASCAR when you bring the old 250 to one of the super speedway tracks... Tony Share this post Link to post Share on other sites
Anthony Wendover 124 #3 Posted October 20, 2008 I don't know if there is a restrictor plate, if there is and you remove it, it will definietly be a violation in NASCAR when you bring the old 250 to one of the super speedway tracks... Tony lol i was gonna say this Share this post Link to post Share on other sites
canam1991 2 #4 Posted October 20, 2008 it goes 25 mph allready stock always wanted to go faster!!!!!!!!!!!!!!!! Share this post Link to post Share on other sites
BPjunk 184 #5 Posted October 20, 2008 Not exactly a restrictor plate but a carb spacer. Now ifn's ya' really do want to fast with ths engine .... it can be done. This Reanult engine was also used in the early 70's in the Reanult Alpine which is basicly a French sports car. Every thing from racing cylinder heads to fuel injection is avaible for this block configuration. Wild Bill in Richmond, Va. Share this post Link to post Share on other sites
canam1991 2 #6 Posted October 20, 2008 and maybe some 12.5 compression pistons and a 3 1/2 cam would make some serious h.p. but i want to it all stock just more h.p. so i can burn out in four gear not just 1-3 !!!!!!! :banghead: Share this post Link to post Share on other sites