Jparkes43 329 #1 Posted November 30, 2014 hello, as you might know i am restoring a 1968 wheel horse lawn ranger with the 6hp engine, i need a new drive belt and if anyone could give me the dimensions for the bels that would be great. not the cutting deck belt the drive belt to the gearbox. thanks james Share this post Link to post Share on other sites
Tristan Wilson 117 #2 Posted November 30, 2014 it should be 1/2x70'' in gates belts I think its a b67 1 Share this post Link to post Share on other sites
Jparkes43 329 #3 Posted November 30, 2014 it should be 1/2x70'' in gates belts I think its a b67 thank you very much, i will get one ordered as soon as i can. Share this post Link to post Share on other sites
Tristan Wilson 117 #4 Posted November 30, 2014 your welcome glad I could help Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,539 #5 Posted November 30, 2014 it should be 1/2x70'' in gates belts I think its a b67 A 1/2" x 70" would be a A68 belt if using that type. The A's are 2" longer than the part number. A 5/8" B-belt is 3" longer than the part number as a B67 at 70". I believe the 1/2" x 70" is the correct size but you could check the belt chart to be sure Find the original number then go to the last pages to find the dimensions in 2 different lists. Garry Share this post Link to post Share on other sites
