motor12 367 #1 Posted November 3, 2014 Looking for the Toro part number for the front wheel grease caps that fit my 854 with 1.5 inch dia. hub. Thanks Share this post Link to post Share on other sites
GlenPettit 1,717 #2 Posted November 3, 2014 (edited) Dealers no longer have these available, so we are reproducing them: (Note: only have Red available, until early December; will be making more this month . . . ) 1.5"ID Red Front Wheel Rubber HUB CAPS These are available in RED, Black and Ivory/White and will fit every 1.5" wheel hub.Our Reproduced Logo Hub Caps will also come with a pair of 1.4" Black or Red "Upper Spindle Caps" (tell me which, otherwise we'll send black) to fit over the upper axle end, (see examples lower left in the photo), that is where most of the dust, dirt & water gets down & in. These are all 'fresh', newly made parts by us here in mid-MI. The logo we use is about 30% larger than the original . The majority of factory Hub Caps used were RED, but White & Black were issued on some models. Be sure to measure your Hub size, these fit onto a 11/2"OD Hub. Be sure to tell me if you want the Black or the Red uppers, and which color Logo Hub Caps; Red, Black or White, otherwise we'll send Red. $20 /pair, including the uppers, plus $2.50 First Class shipping. Extra -- Black or Red UPPER 11/4" Spindle caps are only: $1 @, or 6/$5 or 12/$8 (plus shipping) Prefer personal check or m.o. over PayPal (or just add their 5% service fee): Combine orders to save, contact me for cost.-GlenPettit@WheelHorseForum.com . ( for PayPal transfers, use: GlenPettit@WheelHorseForum.com ) Glen Pettit * 1541 N. Michigan Road * Eaton Rapids, MI 48827-9225 Edited November 3, 2014 by GlenPettit 2 Share this post Link to post Share on other sites
motor12 367 #3 Posted November 4, 2014 Thanks, they look great.. Share this post Link to post Share on other sites
KC9KAS 4,744 #4 Posted November 4, 2014 Thanks, they look great.. They are....I have a few! 1 Share this post Link to post Share on other sites
kudzu3 323 #5 Posted November 4, 2014 Get 'um, they're worth it 1 Share this post Link to post Share on other sites
motor12 367 #6 Posted November 4, 2014 Sent off a check this morning, can't wait to see them installed. 1 Share this post Link to post Share on other sites
AJ_Thanatos 516 #7 Posted November 4, 2014 Here's a set on my C-100 from Glen. Great stuff! Thanks again Glen for making the stuff that is no longer available! 1 Share this post Link to post Share on other sites
