bandit 4 #1 Posted October 15, 2014 I got 211-3 WH mower, the deck has three blades. One of the spindles, pulleys and blade are missing. Was wondering if anyone knew where I can find one or if there's other deck where parts interchange with it. The model and serial numbers have worn off Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #2 Posted October 16, 2014 Welcome to the site. Glad you found us. Good meeting you at the house today. Share this post Link to post Share on other sites
bandit 4 #3 Posted October 16, 2014 Good meeting you as well, I called bout that speedex, day late, had sold it to a guy at big john Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #4 Posted October 16, 2014 Too bad. I know he has been trying to clean up a lot of his stuff as he is downsizing. Share this post Link to post Share on other sites
bandit 4 #5 Posted October 16, 2014 Yea, I'm going to put a call into big john and see what his plans r for it Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #6 Posted October 16, 2014 The owner is actually AL. He is a good guy to deal with. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,499 #7 Posted October 16, 2014 Here are some possible 211-3 deck model numbers with 3 spindles 36" rear discharge 05-36XR04, 05-36XR05 and 05-36RL01 42" side discharge 05-42SB04 and 05-42SB05 42" rear discharge 05-42XR05 and 05-42XR06 This manual should give you the parts lists for the spindle assemblies used on each. Find the deck model number in the index and click on that line. A single page should come up showing all the assemblies used on that deck over the years. Garry Share this post Link to post Share on other sites
daveoman1966 3,611 #8 Posted October 17, 2014 I have lots and lots of spindles for 36 and bigger size decks. Can you post a pic or 2 of what yours look like...or does it look like on here: Share this post Link to post Share on other sites
bandit 4 #9 Posted October 17, 2014 Hope these help, blades were about 13.75" long? Share this post Link to post Share on other sites
daveoman1966 3,611 #10 Posted October 17, 2014 From the pics, yours is a 42" deck. I have the parts you need. send me a direct email to: daveoman@windstream.net (just clik that email link ) Share this post Link to post Share on other sites
