Kpro 3 #1 Posted October 6, 2014 Does anybody have part numbers? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #2 Posted October 6, 2014 Too many to try and list them all. The C-Series except C-195 Twin Auto models 1974-1984 and the 300-Series from 1985 till the last in 2007 will fit. Here is the attachment list that has them Garry Share this post Link to post Share on other sites
Kpro 3 #3 Posted October 6, 2014 Thank you, I picked one up. Now only if I could figure out how the bracket goes on the axle. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #4 Posted October 7, 2014 This manual should help Garry Share this post Link to post Share on other sites
Kpro 3 #5 Posted October 7, 2014 Thanks, that expains it. I have the wrong bracket. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #6 Posted October 7, 2014 If your axle hitch mounts to the front of the axle housing there is a chance the A-frame is also shorter than the intended assembly for your model. Can you post pictures of what you have? Garry Share this post Link to post Share on other sites
Kpro 3 #7 Posted October 7, 2014 The PO has many plows but few brackets. It appears I got a long frame plow with a short frame bracket. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #8 Posted October 7, 2014 Sounds like you have it figured out. Your A-frame fits the long and short frame tractors because of the 2 locations for the rear bar. The blades went from 42in to 48in in 1984 to help you date your blade. Garry Share this post Link to post Share on other sites
Kpro 3 #9 Posted October 7, 2014 Garry, Thank you for all of your help. Kevin Share this post Link to post Share on other sites
