Austin860 82 #1 Posted October 5, 2014 What's the best way to clean the red vinyl sides, and bring out the original red/restore the vinyl. Also what's the best method of cleaning the clear flimsy plastic windows? Share this post Link to post Share on other sites
Austin860 82 #2 Posted October 5, 2014 Came without front or back, so I will be doing my own . Pics to come. But the doors and even the wheel horse symbol are not torn and the white top has no cracks other than tiny ones on the edge Share this post Link to post Share on other sites
Fun Engineer 859 #3 Posted October 5, 2014 I remember someone using oxiclean on the red vinyl. You can find plastic polish used on snowmobile windshields and hoods at most Motorsport and auto stores. Share this post Link to post Share on other sites
Austin860 82 #4 Posted October 10, 2014 Got the cab frame and doors mounted so I could begin to figure out how to make the front and back. Shouldn't be to hard. Will let you guys know with more progress. I know I want to add a rear and front light on the cab, I might want a heater, and maybe even a wiper. Will keep you guys posted. 1 Share this post Link to post Share on other sites
Fun Engineer 859 #5 Posted October 10, 2014 That's a good start. Do you have room to adjust the height up? Maybe someone on the site can help take pictures of their cab frame so you'll know what you need to add to do the vinyl work. Share this post Link to post Share on other sites
