AJ_Thanatos 516 #101 Posted October 30, 2014 This is what I will be using plus the fancy weights I made. 7 Share this post Link to post Share on other sites
RMCIII 838 #102 Posted October 30, 2014 AJ - nice fab job on the wheel weights.... What do they weigh? Hope you get your seat covered by then, may get a little chilly on the back side! Great choice for the winter duties! Rob Share this post Link to post Share on other sites
AJ_Thanatos 516 #103 Posted October 30, 2014 They weigh very close to 90 lbs each! I am also waiting on my new chains as well. I will snap some pics when I get everything mounted up. Yeah going to have to do something with that seat. The original is so hard to find! Share this post Link to post Share on other sites
meadowfield 2,545 #104 Posted October 30, 2014 (edited) Tough one this.... Last year it was this And here's the video http://youtu.be/qRBEHP8sjW4 It's a tough one for this winter, neither Bendy or C4 will take the plough.... Unless I make some serious modifications :) Edited October 30, 2014 by meadowfield 6 Share this post Link to post Share on other sites
RMCIII 838 #105 Posted October 30, 2014 Looks like some place I use to drive by when I was stationed in England...... Nice choice! Rob Share this post Link to post Share on other sites
ranger 1,652 #106 Posted October 30, 2014 I think I would need a few more 'horses' than I have to push this :grin: 24 feet wide! 3 Share this post Link to post Share on other sites
RMCIII 838 #107 Posted October 30, 2014 I'm guessing Aairport application on that one, attached to an endloader! Rob Share this post Link to post Share on other sites
Desko 552 #108 Posted October 30, 2014 Snow in the forecast for tomorrow and Saturday but only flurries. And those are some cool wheel weights. 1 Share this post Link to post Share on other sites
ranger 1,652 #109 Posted October 30, 2014 (edited) Edited October 30, 2014 by ranger Share this post Link to post Share on other sites
ranger 1,652 #110 Posted October 30, 2014 (edited) I'm guessing Aairport application on that one, attached to an endloader! Rob It's just come back from Afghanistan for repairs. some more of our gear on youtube: Schmidt Airport Technology. the company I work for. Doug Edited October 30, 2014 by ranger Share this post Link to post Share on other sites
Fun Engineer 859 #111 Posted October 30, 2014 Two inches predicted for tomorrow in my area [emoji4] 1 Share this post Link to post Share on other sites
RMCIII 838 #112 Posted October 31, 2014 Ranger - so it is airport application... Would be neat to see one of those in action! Fun - 2" is enough to get "GET THIS PART STARTED"!!!! Share this post Link to post Share on other sites
dcrage 621 #113 Posted October 31, 2014 (edited) It will be me on the 310-8 again this year -- Been clearing the driveway with this set up since 1991 (?) Edited October 31, 2014 by dcrage 6 Share this post Link to post Share on other sites
AMC RULES 36,954 #114 Posted October 31, 2014 A proven performer...still getting it done. Share this post Link to post Share on other sites
RMCIII 838 #115 Posted October 31, 2014 Dave - That is one BIG driveway! Great to see your trusty steed is still with you, after all those years... Very impressive! Rob Share this post Link to post Share on other sites
squonk 39,011 #116 Posted October 31, 2014 I was hoping to start getting things ready this weekend but medical issues will delay that some. But the good news is an epic tractor build may be in the works complete with pics and video! I just need to find a short frame plow within reasonable driving distance from me and we are in business! I do have Elvis ready if needed butStay tuned for further developments as they come in! 1 Share this post Link to post Share on other sites
Fun Engineer 859 #117 Posted October 31, 2014 Looks like this will only last a day [emoji30] PERIODS OF HEAVIER SNOW THIS MORNING ONGOING RAIN WILL TRANSITION OVER TO SNOW ACROSS INLAND AREAS OF NORTHWEST LOWER MICHIGAN BY 9 AM AS MUCH COLDER AIR SPILLS INTO NORTHERN MICHIGAN. PERIODS OF HEAVIER SNOWFALL ARE POSSIBLE REDUCING VISIBILITIES DOWN TO LESS THAN A MILE AND PRODUCING A LIGHT COATING OF SLUSHY SNOW ON AREA ROADS. IN ADDITION TO THE SNOW NORTH WINDS WILL INCREASE QUICKLY THIS MORNING WITH GUSTS OF 25 TO 35 MPH COMMON ACROSS THE REGION AND GUSTS IN EXCESS OF 40 MPH NEAR THE LAKE MICHIGAN COAST. THIS WILL PRODUCE WIND CHILL READINGS IN THE 20S. 1 Share this post Link to post Share on other sites
dcrage 621 #118 Posted October 31, 2014 Dave - That is one BIG driveway! Great to see your trusty steed is still with you, after all those years... Very impressive! Rob Rob -- The 'panoramic' view shows a couple hundred feet of subdivision road and the cul-de-sac that my house is on -- And I don't clear much of that -- I just do my 100' driveway and the snow that get pushed off the road in front of my drive way and mail box 1 Share this post Link to post Share on other sites
Jrblanke 840 #119 Posted October 31, 2014 If we get any of the white stuff down here in Raleigh-wood, I'll be using my 314-8. 3 Share this post Link to post Share on other sites
buckrancher 2,675 #120 Posted October 31, 2014 520H with 44" two stage blower Brian 7 Share this post Link to post Share on other sites
RMCIII 838 #121 Posted November 1, 2014 James - was that photo from last year? That is some serious snow for Raleigh..... I vacationed in that area a while back.. Really nice area... Nice WH also! Brian - I'm sure nothing will be too much for that set-up! Rob 1 Share this post Link to post Share on other sites
RMCIII 838 #122 Posted November 1, 2014 Well, I thought, since it is November 1st. and I did no mowing in November that I would get things started for the winter season.... Took the deck off, and prepped it for spring, hung it on the back wall of the garage greased the tractor washed and waxed the tractor mounted the snowblower mounted the rear weights - 60lbs Between the rear weights, wheel weights, and myself, there is close to 400lbs. of added weight to the drive axles.. Seemed to really help last year, the additional weight in the back. All I have left is to mount the cab and put the chains on. 4 Share this post Link to post Share on other sites
RMCIII 838 #123 Posted November 2, 2014 Just finished up getting cab and chains on. Had to take a break. 1 Share this post Link to post Share on other sites
doc724 924 #124 Posted November 2, 2014 Hey Bob, looks sharp and ready for action! I still have one more week of cutting and two more weeks of leaf sweeping before I convert my machine for winter duty. I hope your snowblower belt woes are behind you now! 1 Share this post Link to post Share on other sites
Ed Kennell 35,929 #125 Posted November 2, 2014 Hey Bob, is that cylinder in the lower chute section stock, or is that something you added? My tall chute has a ZEE shaped wire there. 2 Share this post Link to post Share on other sites