Tankman 3,515 #1 Posted September 21, 2014 Workin' on my newly acquired Work Horse. Needs a valve and grommet, leaker. I have a tank, with a good valve and grommet. How does one remove the valve and grommet to re-use in another tank? Share this post Link to post Share on other sites
Sparky-(Admin) 19,684 #2 Posted September 21, 2014 No real trick. The valve comes out first with a pair of pliers, twisting it back and forth and a bit of elbow grease. Then the grommet next.....reverse for installation. Mike........ 1 Share this post Link to post Share on other sites
Tankman 3,515 #3 Posted September 21, 2014 Thanks again Mike! Share this post Link to post Share on other sites
Tankman 3,515 #4 Posted September 21, 2014 (edited) Started nursing this Horse back to health. Edited September 22, 2014 by Tankman Share this post Link to post Share on other sites
Wishin4a416 2,189 #5 Posted September 21, 2014 Started nursing this Horse back to health. That's the fun part of this hobby. Good Luck! Share this post Link to post Share on other sites
