darren 49 #1 Posted September 15, 2014 Does anyone have any examples of how the wiring routes for the parking brake interlock on a hydro tractor? I'm putting a 520 back together and one thing I didn't document was just where the cable goes around the back of the chassis. I reckon the 300/400 hydros will most likely be the same. A trawl of google images and the Red Square search function hasn't turned anything up Share this post Link to post Share on other sites
Martin 2,130 #2 Posted September 15, 2014 theres a few pics in my 416 thread with the seat pan off. this one is the best showing the rear most area.... a few pages in there are a couple more. Share this post Link to post Share on other sites
darren 49 #3 Posted September 16, 2014 Thanks a million Martin, just what I was after. Congratulations on a fabulous rebuild by the way , I'd noticed a while back and had been meaning to set aside some time to read through it, so that was a timely reminder to do so 1 Share this post Link to post Share on other sites