Dieselcowboy 210 #1 Posted September 14, 2014 Is it possible to use a D 3pt hitch on a GT14? A little modifying isn't a problem. Share this post Link to post Share on other sites
KC9KAS 4,741 #2 Posted September 14, 2014 Not an expert on this, but I have a GT-14 and a D-200. Each one has the 3 pt lift and although each one is a little different, I think with some fabrication it will work. Good luck and keep us posted with the progress. 1 Share this post Link to post Share on other sites
Brrly1 1,146 #3 Posted September 14, 2014 I agree with Ken, a little bit of fab work and it should work. Share this post Link to post Share on other sites
papaglide 541 #4 Posted September 14, 2014 I used the D lift arms and linkages on a GT that I had with no issues whatsoever. The GT was allready equipped the the 3point internals though. Share this post Link to post Share on other sites
Brrly1 1,146 #5 Posted September 15, 2014 The only difference in the lower arms are the GT14 lower arms are I believe 5/8" thickness where the D series lower arms are 3/4" thick Share this post Link to post Share on other sites
