as350mechanic1 1 #1 Posted September 7, 2014 Alright new poster here. I have a b80 that I bought from an estate sale for practically nothing. It needed an oil change and a battery and it fired right up. I purchased a 06-42st04 blower for practically nothing as well. It attaches to the front with the mule drive off no problem but the lift bar must be from a different model blower. It's too long to attach to the normal mower deck lift point. Where does that lift "flag" attach underneath if that's the correct blower? Share this post Link to post Share on other sites
Sparky-(Admin) 19,651 #2 Posted September 7, 2014 The B-80 has slightly shorter frame, you might have to cut the bar down. Read this thread for an explanation of where the flag attaches... And of course> ! Mike.......... Share this post Link to post Share on other sites
groundhog47 347 #3 Posted September 7, 2014 (edited) to , here is a link to implement interchanges: Will search further for yours and edit in . Manual (parts breakdown) link for blower: Operators manual: Excellent pics on attach Mike! Edited September 7, 2014 by groundhog47 Share this post Link to post Share on other sites