buckrancher 2,694 #1 Posted October 7, 2008 The fog was heavy as we slipped across the PA. border sat. morning perfect rustlin' weather Too bad you guy's are so busy watching your southern border mower deck and front blade The clinton 1290 does run :banana: :banana: :horseplay: :horseplay: :omg: Share this post Link to post Share on other sites
JimD 3,347 #2 Posted October 7, 2008 looks like you had a good "roundup". Share this post Link to post Share on other sites
Duff 206 #3 Posted October 7, 2008 From the looks of the decals, Brian, the PO didn't want anyone to mistake who made the tractor! Nice acquisition! Duff :USA: Share this post Link to post Share on other sites
CasualObserver 3,411 #4 Posted October 7, 2008 Nice grab... now you'll have to be on the lookout for a Schnacke recoil to go with it. (that's the type that goes with that starter pulley) :banghead: Share this post Link to post Share on other sites
stevinator 1 #5 Posted October 7, 2008 Oh that's a great one to restore all the good stuff is there. :banghead: Share this post Link to post Share on other sites
perry 82 #6 Posted October 7, 2008 nice find . i think i have that same plow hitch, but with some added hardware on it. i thought some of it looked factory. here it is bolted on the 552. 552 pics Share this post Link to post Share on other sites
Rod(NASNUT) 1 #7 Posted October 7, 2008 :banghead: I guess we were all looking the wrong way Thatis a nice find :omg: Share this post Link to post Share on other sites
buckrancher 2,694 #8 Posted October 8, 2008 Nice grab... now you'll have to be on the lookout for a Schnacke recoil to go with it. (that's the type that goes with that starter pulley) yeah I'll be keeping my eye's open for one I drove the tractor around the yard some tonight it runs well at idle to half trottle at full trottle the engine shurge's up & down I took the carb off and cleaned and blew it out with air put it back on the engine with no results I can't adjust it out with the hi speed jet when I was cleaning the carb I noticed there is yellow paint specks on the outside so it is probably not the correct carb does anyone have a picture of the right carb set up and part # for this engine :omg: Share this post Link to post Share on other sites
