Dhodge 528 #1 Posted August 23, 2014 So I added it to my collection. Has a nice little K-90 on it. I also picked this little guy up 6 Share this post Link to post Share on other sites
nylyon-(Admin) 7,130 #2 Posted August 23, 2014 You've been busy, very nice additions Share this post Link to post Share on other sites
AMC RULES 36,961 #3 Posted August 23, 2014 (edited) Nice four oh one Serial/ID tag still on it? Edited August 23, 2014 by AMC RULES Share this post Link to post Share on other sites
Racinbob 10,450 #4 Posted August 23, 2014 Sweet! That will look great with that trailer in tow. Share this post Link to post Share on other sites
Geno 1,928 #5 Posted August 23, 2014 Nice find for sure. Share this post Link to post Share on other sites
Ed Kennell 36,134 #6 Posted August 23, 2014 Nice tractor/trailer combo. Share this post Link to post Share on other sites
Molon_Labe 731 #7 Posted August 23, 2014 That is a nice one for sure! Great find Share this post Link to post Share on other sites
speedyleedy 205 #8 Posted August 24, 2014 Nice find ! Share this post Link to post Share on other sites
Dhodge 528 #9 Posted August 24, 2014 (edited) Thanks for all the nice comments guys. I drained the oil and cleaned the carb, tank and sediment bowl on the 401 yesterday. It fired up and ran real nice. Had to solder the float in a place or two that had pin holes. The rear end seems to be a little tight. Have any of you gents had any luck flushing it out with kerosene or fuel oil or should I take the tranny apart, clean and inspect? Edited August 24, 2014 by Dhodge 1 Share this post Link to post Share on other sites
AMC RULES 36,961 #10 Posted August 24, 2014 Brought home big lot of 401 parts from the big show... in there was a trans that was all but locked up, could only get it to spin over 1/8 turn. Flushed, and filled it with diesel for a week, spins like butter now. Never know...you can give it a try first. 1 Share this post Link to post Share on other sites
Racinbob 10,450 #11 Posted August 24, 2014 Good advice. If it doesn't help at least you'll have it cleaned out a bit if you do end up tearing into it. Share this post Link to post Share on other sites
Dhodge 528 #12 Posted August 24, 2014 OK. I will give it a try. Thanks guys! Share this post Link to post Share on other sites
