JamesC-120 204 #1 Posted August 18, 2014 I need to find an undersized rod and over sized piston and rings for my H60. Does anyone know where to find them? Thanks Share this post Link to post Share on other sites
KATO 115 #2 Posted August 20, 2014 These guys may have a ring set ...you might want to phone them or e-mail them http://www.mowtownusa.com/Tecumseh-Engine-Part-34855-RING-SET-010_p_86672.html the piston and pin are apparently still available at .010 over size. item number 14 33313B Piston & Pin Assy. (.010 oversize) http://www.jackssmallengines.com/Jacks-Parts-Lookup/Model-Diagram/tecumseh/92616/11559 There are aftermarket rods available in std size only Tecumseh part num -31380C you will likely have to get your crank throw built up with chrome and ground down or find a good crank somewhere Share this post Link to post Share on other sites
SousaKerry 503 #3 Posted August 20, 2014 Ebay has been the best source for me. Look for this seller I have had good luck with him in the past http://www.ebay.com/usr/bakt4kids?_trksid=p2059210.m2749.l2754 Share this post Link to post Share on other sites
