Buda 11 #1 Posted August 17, 2014 The Starter/Gen is one of the last parts I need to finish my 855. It has never charged for me, what voltage regulator do I need? Part #....I have looked around and can't find what I'm looking for. Any help would be much appreciated. Thanks Much Tom Share this post Link to post Share on other sites
Martin 2,133 #2 Posted August 17, 2014 (edited) i have got them from a seller on ebay and have been happy with them. you need to get a 4 terminal, the 4th terminal is on the bottom of the regulator for the armature, also the outside terminals of the 3 are angled out some. also the base needs to be curved. search ebay, there are 3 available from this seller "classicchrysler" 12 Volt Generator Voltage Regulator 1118266 1118306 1118791 1118983 For Delco Tom, is your starter generator ok, or does it need rebuilding? Edited August 17, 2014 by Martin 1 Share this post Link to post Share on other sites
Buda 11 #3 Posted August 17, 2014 It very well could.....I did some check on it this past winter.....power to one spot and ground the other than move one or the other to a 3rd spot and it did what it was supposed to do. I wouldn't mind having someone rebuild it if you know of a reputable place in the area. Thanks Tom Share this post Link to post Share on other sites
Martin 2,133 #4 Posted August 17, 2014 don't know of anyone, but they are fairly easy to dismantle and clean. there are a few posts on the forum about this subject. if i had the time i would do it for you. I'm sure if you wanted to tackle it yourself, a few of us could walk you through it. the service manuals have instruction as well..... Share this post Link to post Share on other sites
Buda 11 #5 Posted August 17, 2014 This is where I'm at now 1 Share this post Link to post Share on other sites
Martin 2,133 #6 Posted August 17, 2014 looks great. Are you from the Ohio IL area? i think i remember talking to you last year sometime when you joined. Share this post Link to post Share on other sites
Buda 11 #7 Posted August 17, 2014 Buda, IL about 35 miles east of you just off Rt 6 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,532 #8 Posted August 17, 2014 This older Kohler service manual has a section on the mechanical regulators Garry 1 Share this post Link to post Share on other sites
Buda 11 #9 Posted August 17, 2014 Maybe not that far Share this post Link to post Share on other sites
Buda 11 #10 Posted August 18, 2014 Thanks Gary I'm sure that will come in handy.....Martin I'll start with the voltage reg and if that doesn't do it I guess its rebuild time. If thats the case I'll be asking for help I'm sure. 1 Share this post Link to post Share on other sites
