Fishgill 0 #1 Posted August 16, 2014 I have a mid 80s C105 and I need to replace the mule drive belt. What size would it be. Thanks Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,499 #2 Posted August 16, 2014 What is the width of cut? 36" side discharge 36" rear discharge 42" side discharge 42" rear discharge 48" side discharge - too big for 10hp but possible Mower belts are listed with the mower decks so need to identify the deck. Garry Share this post Link to post Share on other sites
Fishgill 0 #3 Posted August 16, 2014 It's a 42" rear discharge deck. The belt seems to be around 98" long. I can't see any numbers on it at all. Thanks Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,499 #4 Posted August 16, 2014 The original drive belt was 102741 (1/2" x 96.6") in the parts list BUT this service bulletin changed that to 108834 (1/2" x 98") Garry Share this post Link to post Share on other sites
Fishgill 0 #5 Posted August 16, 2014 (edited) I was able to get a 98" x 1/2" belt. It works well. Thanks Edited August 16, 2014 by Fishgill Share this post Link to post Share on other sites
