chipwitch 73 #1 Posted August 1, 2014 Anyone know off-hand what the output RPM's are for the TL3601? It's on a 1980 C-125. Thanks Share this post Link to post Share on other sites
zieg72 209 #2 Posted August 1, 2014 I would run about 1/2 throttle and it worked fine Share this post Link to post Share on other sites
chipwitch 73 #3 Posted August 1, 2014 RPMs. Tine rpm's Share this post Link to post Share on other sites
bubbacola 8 #4 Posted August 1, 2014 I like to run at full speed on motor and move as slow as I can made it go.. This let tiller dig smaller bits of dirt which will be more pulverized when done... Slower motor speed and fast travel speed will take bigger bit and leave bigger chunks of dirt... motor RPM 3600 .. two to one reduction to tiller.. 1800 RPM.. tiller gear box another two to one(guessing) 900 rpm at tiller . My 2 cents 1 Share this post Link to post Share on other sites
chipwitch 73 #5 Posted August 1, 2014 Just thought someone might know off-hand. I'll put a tach on it this weekend. Share this post Link to post Share on other sites