fanaticx 6 #1 Posted July 12, 2014 I just purchased a 312-8 and it wasn't put together completely when I got it. I'm wondering if someone can get a picture of how the lift arm attaches to the tractor. I'm trying really hard to figure it out but nothing is making sense so far Share this post Link to post Share on other sites
varosd 1,185 #2 Posted July 12, 2014 (edited) Welcome to RS! do you mean for the deck? or this? Edited July 12, 2014 by varosd 1 Share this post Link to post Share on other sites
fanaticx 6 #3 Posted July 12, 2014 Where and how does it connect to the tractor in the back? I was able to find a picture like those but not how it attaches to t jg r frame I guess Share this post Link to post Share on other sites
fanaticx 6 #4 Posted July 13, 2014 I figured it out. My lift arm is broken. Share this post Link to post Share on other sites
fanaticx 6 #6 Posted July 13, 2014 OK just so I'm sure does the lift arm mount really high like almost right under the seat Share this post Link to post Share on other sites
Don1977 604 #7 Posted July 13, 2014 The rocker shaft goes back there, it's part of the clevis hitch. Should be attached to the to the lift (#19) shown above with a steel cable though tube (#30). Share this post Link to post Share on other sites
rexman72 210 #8 Posted July 13, 2014 welcome to the group Share this post Link to post Share on other sites
varosd 1,185 #10 Posted July 13, 2014 OK just so I'm sure does the lift arm mount really high like almost right under the seat do you mean the handle to lift the deck (on the left side of tractor while sitting on it, #1) or the lift arm #27, under the dash? Don1977 is correct if you are trying to set up a tiller. that's the only thing under the seat. except for the snow blade hitch that attaches to the rear axle. pictures would be a great help. Share this post Link to post Share on other sites
fanaticx 6 #11 Posted July 13, 2014 The lift arm under the dash or tractor. I think I've finally got it figured out but thanks everyone for the help. I'm just trying to mount the Deck right now Number 27. There where 2 holes close to the ground that it looked like it mount in but I'm thinking it goes up above those. Share this post Link to post Share on other sites
fanaticx 6 #12 Posted July 17, 2014 Here is the part I was asking about. I hope I made it right. Share this post Link to post Share on other sites
fanaticx 6 #13 Posted July 18, 2014 Ok so this part was a little off. Is there someone on here that can measure theirs and give me the dimensions for the 2 sides? I know it will be a pain but I'm really trying to save some money Share this post Link to post Share on other sites
