BairleaFarm 340 #1 Posted September 28, 2008 Can I take the hydro lift off the c160 and install it on the b100? It looks like the ports are in a lower place on the pump than the c160. Share this post Link to post Share on other sites
bluetuna08 0 #2 Posted September 28, 2008 I think you can. you just might need to order or find some o-rings, and shims, and maybe 2 plugs, a ball, and 2 sundstrand spring valves. also it looks like there might be a little tin knocking as well but not too bad. the hoses will probably need to be longer too, but you could get those at brake service or Parker. you can do it!! :banghead: Share this post Link to post Share on other sites
BairleaFarm 340 #3 Posted September 28, 2008 I think you can. you just might need to order or find some o-rings, and shims, and maybe 2 plugs, a ball, and 2 sundstrand spring valves. The hose dont just screw into the ports???? Share this post Link to post Share on other sites
bluetuna08 0 #4 Posted September 28, 2008 what year c160 are you using parts from and what year b100 are you modifying? I assumed it was a 76 and 75 respectively . Share this post Link to post Share on other sites
BairleaFarm 340 #5 Posted September 28, 2008 It is - will be Share this post Link to post Share on other sites
bluetuna08 0 #6 Posted September 28, 2008 between the c160 and b100 piston - piston type hydrostatic rearend there is a difference. the parts that a mentioned before look like they are needed if you want to add hydraulic lift to the b100. Attached Image (Click thumbnail to expand) Share this post Link to post Share on other sites
