Dhodge 528 #1 Posted June 2, 2014 I brought home my first R.J. Not sure what year yet, but I believe 68 or 69. Someone cut a hole in the hood for an exhaust pipe and it is missing the sediment bowl. Mostly complete though. The exhaust shield was taken off for the ride home, bit its there. I am not sure the pulley / belt guard is correct though. Give me your thoughts fella's 1 Share this post Link to post Share on other sites
Kelly 1,028 #2 Posted June 2, 2014 I think you meant 58 or 59 guard looks like a mower deck guard, but I'm not the mid engine guy here. Share this post Link to post Share on other sites
AMC RULES 36,954 #3 Posted June 2, 2014 Congrats, nice score. Left front frame rail... any remnants of the ID tag still in place? Any numbers stamped on the trans top, next to the shifter? Share this post Link to post Share on other sites
Dhodge 528 #4 Posted June 2, 2014 Yes 1958 or 59. My first 50's model. Most of the rest are early 60's models. I should have seen that when I reviewed my post. I will be looking for a few parts. I'm gonna try to put this one back to look like it did new---wish me luck!! Any advise will be soaked up like a sponge. Congrats, nice score. Left front frame rail... any remnants of the ID tag still in place? Any numbers stamped on the trans top, next to the shifter? Nothing. I hate when the mod, serial and spec #'s are missing. Share this post Link to post Share on other sites
Wheel-N-It 2,967 #5 Posted June 2, 2014 I'd say that little RJ is lucky to be rescued by a Red Square "Supporter" Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,487 #6 Posted June 2, 2014 looks nice, a good foundation to work with. best of luck. Glenn Share this post Link to post Share on other sites
VinsRJ 721 #7 Posted June 3, 2014 Looks like you have a nice foundation to start with! Share this post Link to post Share on other sites