ShotgunTimmy 1 #1 Posted May 30, 2014 I'm new here and I apologize if I missed somewhere on here if it's already been discussed, but I recently purchased a 607. It's been stripped down (no deck) and only came with the plow assembly (which is why I bought it originally). But after I started looking at it, I thought, might as well touch up the paint...might as well put some new rear tires on it... might as well repaint the whole thing haha but my question is, somebody had put a Snapper seat on it that's cracked and holds water like a sponge. I bought an old metal pan seat I want to put on it, but if I bolt the seat directly down to the fender pan, that seems like a bumpy ride in my future, but if I buy the u-shaped spring for the seat, that's going to raise the seat height up 4". I guess I'm looking for an opinion on what you guys have seen or done. I'm not doing a full restore or anything, just giving an old tractor a face lift. Thanks in advance for any tips or pointers you can provide. Share this post Link to post Share on other sites
slammer302 2,154 #2 Posted May 30, 2014 Bolt it directly to the pan I've been through this before 1 Share this post Link to post Share on other sites
ShotgunTimmy 1 #3 Posted May 30, 2014 Thanks for the fast reply! Share this post Link to post Share on other sites
ShotgunTimmy 1 #5 Posted May 31, 2014 I'll post a before and after pic after I'm done. Like I said it's just a re-paint with new tread on the rears. But man...once you start, you can't stop! (My wife hates it haha) My little girl said she wanted a horse. She needs to be more specific in the future! 1 Share this post Link to post Share on other sites
slammer302 2,154 #6 Posted May 31, 2014 That's how it starts Share this post Link to post Share on other sites
ShotgunTimmy 1 #7 Posted May 31, 2014 Somebody really beat mine up over the years, but I guess it is 47 years old. I'm 46 and kind of beat up myself, so I can relate. Share this post Link to post Share on other sites
ShotgunTimmy 1 #8 Posted May 31, 2014 Before shot, and mid process shot Share this post Link to post Share on other sites
slammer302 2,154 #9 Posted May 31, 2014 Do you have a deck for it? Share this post Link to post Share on other sites
ShotgunTimmy 1 #10 Posted May 31, 2014 No. It only had the blade assembly. I got the tractor and blade for $150.00 Share this post Link to post Share on other sites
slammer302 2,154 #11 Posted May 31, 2014 Not bad I see its kohler powered that's a plus Share this post Link to post Share on other sites
slammer302 2,154 #12 Posted May 31, 2014 Here's my plow team 1 Share this post Link to post Share on other sites
ShotgunTimmy 1 #13 Posted May 31, 2014 (edited) The fender pan is really beat up. I thought about fabbing up my own design but didn't know if that was sacreligous. Edited May 31, 2014 by ShotgunTimmy Share this post Link to post Share on other sites
slammer302 2,154 #14 Posted May 31, 2014 Once you get a seat on it and start using it around the house those little things don't matter ive found out if your going to use one for work they usually end up with some bumps and bruises Share this post Link to post Share on other sites
speedyleedy 205 #15 Posted May 31, 2014 Great looking tractor ! 1 Share this post Link to post Share on other sites
