0907 1 #1 Posted May 27, 2014 I would like to get a tiller for my wheel horse. There is one on CL here that is listed as for vertical shaft tractor. Who knows what that will fit and what kind of pulley riggong needs to be acquired? I have a 310-8 and a 417xt. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,509 #3 Posted May 27, 2014 These models will all fit the 310-8 07-36TL02 07-36TL03 07-36TL04 07-36TL05 79370 They are all basically the same so familiarize yourself with all the bits and pieces necessary to attach it and run it. The parts lists for each show the rear axle quick hitch (same as dozer blade if you have one of those) and the idler pulleys needed. If you need help getting the ipl's let us know. Here is an operator manual so you can see how they hook up There are 2 tillers for the 417Xt models 79271 and 79484. Info here https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro Type in 417XT and then open the link to the attachment list on the right of the page. There are other pieces required to attach it. Garry Share this post Link to post Share on other sites
0907 1 #4 Posted May 27, 2014 Thanks Garry. I'm not flying blind anymore! At least now I have an idea what I'm looking at. One for sale said wheel horse number 105111. Not sure where that falls in with what I have. Dresden, do you know the model number ok that implement? Dave Share this post Link to post Share on other sites
squonk 38,980 #5 Posted May 27, 2014 The one Dresden Guy has will work on your 310 Share this post Link to post Share on other sites
0907 1 #6 Posted May 28, 2014 Well....I don't exactly have the 310 running right now. I just bought it and haven't had a chance to check it out yet. I think Mrs. Boss might see a tiller for that one right now as counterproductive. I would love it, but it will have to wait. Couldn't pass it up tho for a hundred dollar bill! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,509 #7 Posted May 28, 2014 I don't recognize the 105111. It may be a serial number but can't trace a 6 digit serial. Garry Share this post Link to post Share on other sites
0907 1 #8 Posted May 28, 2014 Ok. This is more difficult than I expected. What about a sleeve hitch? I know Brinly makes mold boards and discs. I seem to be seeing a lot of them used. Any help is great. Thanks. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,509 #9 Posted May 28, 2014 Go into the Manuals section and do a search for Hitch Rear Clevis Garry Share this post Link to post Share on other sites
