Vatorman 2 #1 Posted May 27, 2014 This is a picture of my 1045 frame, can anyone tell me and hopefully send me a pic of what these broken tabs are for? I would like to know what they looked like so I can remake them. Thanks Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
buckrancher 2,694 #2 Posted May 27, 2014 (edited) tabs were to hold the belt guard on Edited May 27, 2014 by buckrancher Share this post Link to post Share on other sites
pacer 3,177 #3 Posted May 27, 2014 Dang, didnt even leave at least one to model after! Anyway, they should be a simple "L" shape, about the same length/width as the part thats welded on and drilled/tapped 1/4x20. By the way, drill & tap the hole first, before you do the bend or weld - dont ask how I know that Share this post Link to post Share on other sites
buckrancher 2,694 #4 Posted May 27, 2014 z shaped 1/2" by 1/8" stock make over all height after bends 1" tall 1/4-20 threaded hole on center one end Share this post Link to post Share on other sites
