jwiss1995 17 #1 Posted May 20, 2014 Just bought a 1077 for $275.00 and hope I got a good deal. Needs a hydraulic line for the lift and a pto bearing. My question is where can I find the bearing?? I've been looking for one and can't find one at all. It is the sealed bearing at the end of the pulley. All I need is the bearing. The tractor when I got it ran great and mowed good till the bearing started to smoke so I stopped haha. Any help would be appreciated! Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,498 #2 Posted May 20, 2014 jwiss. Well come aboard. I found mine all NOS on flea bay. There is a manual section on this site to. Best of luck. AND WE NEED PICTURES BUDDY. LOL btw. There is a little stub shaft. Ck it out to. Glenn Share this post Link to post Share on other sites
squonk 43,793 #3 Posted May 20, 2014 I think the brg # is a 204RR6 availiable at Napa Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,472 #4 Posted May 20, 2014 PT-6 is for a 1-1/8" crankshaft. Looks like it was an option in 1967. Some 10hp engines used a 1" crankshaft but don't think this was one of them. Here is the manual Wheel Horse 5196 bearing replaced by Toro 109842. Napa 7-04250 Rotary 484 Stens 230-033, Stens HD 230-037 Generic 9504AB Here is the tractor manual Garry Share this post Link to post Share on other sites
squonk 43,793 #5 Posted May 20, 2014 204RR6 is the same as 7-05250 Share this post Link to post Share on other sites
jwiss1995 17 #6 Posted May 20, 2014 Thanks for the info guys! I just ordered one. I can't upload any pictures because it says my file is too large? I'm not the best with computers haha Share this post Link to post Share on other sites
