glgrumpy 35 #1 Posted May 18, 2014 Have a 14-38HXL Lawn tractor #71193. Bought a blade for Toro that might fit and not sure. Have downloaded the owner's manual and parts man now. Parts drawing is quite loaded up and confusing to follow for me. I have now figured some major parts are missing on mine. I know they have those lines going to places to put the parts to, but they go all over and just can't seem to get the picture in my mind of how they look when done. Can't hold paper at right angles as looking at blade to see it in mind, heh! I would like a picture of one, on or off the tractor showing the linkages hooked up. I don't have any of the lift arm assembly but that is simple one place connection. It is the unlock and swing part that I'm having the issues with. I have two of three link rods, but one I have doesn't look like drawing either. No dimensions on the parts to compare better. This is model 16-42bl02 blade and serial 2000277. Op manual is 810454R1 from Toro site. My copy is not real clear and haven't studied much yet to see about mounting and such. Pix kinda poor to see clearly the set-up. My info is saying for 90 to 92 tractor. But Toro page says 93 to 2006 for this model, so not sure why so diff. Anyone with pix? Can send PM or tell me and I will give email to send to. I'm doubting I will find Used parts for missing items too being so new. Have not checked on new and prices, but sure would be more than the project is going to be allowed. Man, this newer stuff is harder to work with and on for sure. Share this post Link to post Share on other sites
stevasaurus 23,281 #2 Posted May 19, 2014 Check out this link for a much better drawing then, it sounds like, the one you have. Share this post Link to post Share on other sites
glgrumpy 35 #3 Posted May 21, 2014 Saw and got that. I sure couldn't find it myself, too many things to look thru and not sure how to search those files. Anyway, Instead of Toro sight I can' seem to run, my boss was looking at work on Diff part site, seems like Joes something and has neat pix and easy to just click on part or price to light up and availability and all neat stuff. Better less cluttered pix too. Anyway, have this drawing of the Mounts to put this blade on His 96 tractor. Looks like major parts,but do have a lead from guy who put his blade on diff tractor brand. Hoping he has these. Not sure file will load, I have trouble with that too and don't know how to fix. Here goes. Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted May 22, 2014 All this work to put a blade on, I hope he don't tear the trans out, the little transmission they have will not take much. 1 Share this post Link to post Share on other sites