glgrumpy 35 #1 Posted May 13, 2014 Boss got a Toro 14-38HXL and was asking about a snow blade for back. I told him would need a hitch first and would be best to have a blade for Front instead. Don't know newer stuff and not sure if this is a Toro/Wheelhorse or just a Toro. Have no ID numbers and he is not sharp enough to know what I'm talking about for models and engine types and such. Where/how can I get more info on this model and what actual attachments are needed and if any around? Don't know where to start, cept here then. Thanks! Share this post Link to post Share on other sites
Kelly 1,033 #2 Posted May 13, 2014 That is a little vert. shaft mower, they make snow blades for them, but unless your only going to push a couple inch's of snow they are worthless, I sold one a few years ago with a blade, guy complained it would not push much snow, even with tire chains, and his 250 lb's in the seat Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,474 #3 Posted May 13, 2014 Go to https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro and enter the 14-38HXL Next page on the right is a link to the attachment list for each one. Take a model and serial number here for manuals https://lookup3.toro.com/request/request.cfm Garry Share this post Link to post Share on other sites
glgrumpy 35 #4 Posted May 15, 2014 OK, hard to do those pages. Found parts pages but don't see where to go to another page for attachment lists. I don't have the exact model digits other than what I gave here and looks like I need them to look. I have a picture here if it will load of a blade I found at show today. Is a model 1642BL02. Not sure if that last O is letter or number and can't get it to work on earlier pages at all. Nope file too big. WHY doesn't this forum adjust automatically like GTTalk?? I'm puter dummy! Share this post Link to post Share on other sites
