jeff w 4 #1 Posted May 9, 2014 Recently replaced my seat switch on my C-81 after replacing dog point screw (old switch had just fallen apart). After new switch installed PTO runs when on or off the seat (continually). Conductors look to be in good shape! Any thoughts on the cause?? In addition, need to remove left side hub for seal replacement and thought I'd get suggestions in the event hub is stubborn. Thank you in advance! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,393 #2 Posted May 9, 2014 When the pto is engaged the seat switch powers the ignition. When the pto is disengaged the pto switch powers the ignition. Here is a diagram Garry Share this post Link to post Share on other sites
