seuadr 489 #1 Posted May 4, 2014 I assume this is normal - but i'd like to make sure. I searched but either didn't use the right terms or no one seems to be discussing it - I noticed that my 520H turns MUCH tighter to the left than the right.. i am assuming that this is because the deck discharges to the right, so you find yourself turning to the left much more often? Share this post Link to post Share on other sites
Don1977 605 #2 Posted May 4, 2014 There have been some where the triangle plate on the front of the fan gears shaft was welded on crooked. You might want to check that with the fan gear centered. 1 Share this post Link to post Share on other sites
Kelly 1,033 #3 Posted May 4, 2014 I've seen and repaired the alignment issues with the incorrectly welded lower steering shaft, I'll see if I can find the post it's a few years old Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted May 4, 2014 You can read about the problem I had in this post, and how I fixed it. 1 Share this post Link to post Share on other sites
Kelly 1,033 #6 Posted May 7, 2014 Is that the problem with yours ? like mine had. Share this post Link to post Share on other sites
seuadr 489 #7 Posted May 7, 2014 not sure, haven't had time to dig into it, but i suspect that is the case - i'll probably mow with it this season as is and then this fall take it apart and look, since i plan on doing a refresh on it prior to snow blowing season (if we even get a break before!) Share this post Link to post Share on other sites
